Brick Paver Installation & Edging



Staging of product

Many paver tasks will vary depending upon access, website conditions, job size and naturally, the weather condition. These situations can have a general impact on your job from a timing stand point. Mindful consideration needs to be required to figure out the time to start the paver installation. Constantly try to decrease or avoid any traffic on the ready areas.

The foreman or task manager must always have the materials (sand/ pavers) distributed around the job site for easy and effective installations. Paver pallets/bundles must be positioned in a manner not to hinder the paver installation. The proper pallet/bundle placement can make the real task installation easier and quicker by minimizing the overall labor of dealing with the product.

Brick paver patterns

Pavers can be placed in various patterns depending upon their shape. Each paver shape will typically have a number of different hatch patterns that are offered by the maker.

The laying pattern and shape of the paver is very vital to the efficiency of the application. Specialists need to consider the traffic weight loads on their paver tasks. 90 or 45 degree herringbone patterns are recommended in all street and driveway applications, as these patterns will offer the optimum load support needed and will withstand creeping from the turning of tires and braking or starting of car traffic. In the majority of applications worldwide, it has actually been revealed that pavers laid in a herringbone pattern have performed sufficiently.

Pavers that are 60 mm (2 - 3/8 in) thickness appropriate for pedestrian applications. Pavers that are going to be utilized in commercial or industrial applications should be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a variety of conditions that figure out the beginning point of a paver project.

When starting to install pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface of the bedding sand at the completed elevation of the pavers This will assist as a guide for keeping straight joint lines and will also allow the installer to make modifications in the alignment of the pavers.

Structures and concrete suppressing are generally not straight and ought to not be used for developing straight joint lines. The usage of string lines is necessary to figure out the true straightness of the edge. As the paver installation progresses, the string lines will help reduce the requirement for little trim pieces.

These will maintain a minimum joint width and allow the bedding and jointing sand to enter between each paver. Pavers with spacer bars are typically not laid in snug against each other considering that a string line will offer constant joint spacing.

Installation of brick pavers.

One of the most commonly used techniques for the installation of pavers is hand installation of each paver. It is best to install a single row of pavers along one of the true straight lines that you have actually pulled or above the bed linen sand. This will provide you a straight and real line off which to work. When this row is developed, you can continue to work outside into the field with the remainder of the pavers. Constantly ensure to regularly inspect your joint lines to make sure they are straight and real. If not, modifications to the pavers can be made as you continue setting up. Pavers must be installed hand tight. The best technique is to put a paver against another one and let it slide down into the bedding sand. Do not kick or tap the pavers into place as this can toss your lines out of true straightness.

When setting up pavers on a high grade, they need to be set up at the base of the grade going uphill. This will avoid the pavers from sneaking as they are being laid.

On large industrial and industrial applications, hand laying pavers would not be cost effective due to the labor intensity. The best method for setting up pavers on big jobs is to install them mechanically. Using a mechanical laying device can install approximately 6000 - 7000 sq ft a day. There Koi Pond Florida are a couple items a specialist should think about before installing pavers mechanically:

1.) Mechanical installers are just efficient in installing pavers in specific patterns.

2.) The professional should ensure that the producer is capable of manufacturing and bundling pavers in the wanted pattern on the pallets for simple mechanical installation.

3.) Professionals may encounter a color mixing scenario coming off the packages of pavers Poor color blending could lead to a patchy looking installation. Most manufacturers follow color mixing on each bundle of pavers, however it is the professional's obligation to ensure correct mixing in the field.

Cutting treatments for brick pavers.

Professionals generally have two methods of cutting pavers. Pavers are cut either by 1). A double bladed guillotine or by 2). A gas powered cut off saw or brick saw which is geared up with a diamond blade. The diamond blade cut-off saw or brick saw will provide a much cleaner and more precise cut. A lot of brick saws will have a hose pipe attachment on them which will permit the operator to cut the pavers wet. When cutting pavers damp, it will assist reduce dust and will prolong the diamond blades life too. The operator of the brick saw need to constantly cut the pavers away from the surface area of the paver field when cutting wet, due to the fact that the pavers will develop a slurry that will stain the paver surface. Pavers that are cut should not fit tight, enough spacing must be available for jointing sand.

The brick saw operator should constantly use the proper security that is needed for running a saw, such as eye, ear, respiratory and hand defense ).

Edging types

Edge restraints play a major role in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the outer boundary of the paver application, without an edging restraint, your project is ensured to fail with time.

Usually made edge restraints are the most frequently utilized by contractors. Made edging restraints can range from, plastic edging, steel and aluminum, lumbers or precast concrete and stone.

Edging installation.

This could result in the migration of the bed linen sand and eventual lateral motion of the pavers. If there is a possibility of losing bed linen sand between the pavers and the edge restraint, then geo textile material is advised. When a gap in between the pavers and the edging goes beyond 3/8" (10mm), then the space ought to be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers have to be compacted. The entire location that is to be compressed ought to be swept tidy of any foreign things and debris that can cause scuffing or scratching on the surface of the pavers.

In addition, it is crucial that the first compaction takes place before any jointing sand has actually been used to the pavers. If jointing sand is applied to the pavers before compaction takes place, this can trigger a bridging issue and will not allow the joints to be completely filled with jointing sand. This can also avoid the pavers from being effectively set into the bed linen sand.

When compacting the pavers, it is suggested that you make a minimum of 2 passes in various directions across the pavers. This will enable the pavers to be appropriately embeded in the bed linen sand and will require the bedding sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very critical to the final efficiency of the pavers. Failure to do proper compaction can result in deformations and pavement failure gradually.


Paver pallets/bundles must be positioned in a way not to interfere with the paver installation. One of the most widely used techniques for the installation of pavers is hand installation of each paver. The operator of the brick saw must constantly cut the pavers away from the surface area of the paver field when cutting wet, due to the truth that the pavers will produce a slurry that will stain the paver surface area. Edging restraints remove lateral motion of the pavers and hold the pavers securely together. When a gap between the pavers and the edging exceeds 3/8" (10mm), then the space ought to be filled with cut pavers.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Comments on “Brick Paver Installation & Edging”

Leave a Reply

Gravatar